Bucket Shelf

Made in Australia

Bucket
Shelf

Your bucket. Upgraded.

A 3D-printed organiser shelf that slides onto an EasiYo bucket. Every piece of the kit has its own place, under a magnetic lid.

Regular is $99 AUD, charcoal PLA Matte, without lighting. Premium is $249 AUD and lights the pockets when you lift the lid. Photographs on this page show Premium.

Bucket Shelf Premium with the charcoal lid closed, resting on a white bucket.
Premium edition, lid on. The shelf rests on the bucket’s shoulder.

Slides on. Sits on the shoulder.

The bore is Ø136 mm. It slides over the neck of an EasiYo bucket and rests on its shoulder.

Bore
Ø136 mm
Footprint
220 × 220
millimetres
Height
19 / 42
mm at the rim / mm with the lid on

The kit

A place for every piece.

The large round opening is the bore, not a pocket. It goes over the bucket. Around it, five places.

  1. 01

    Lighter slot

    Stadium

    A regular BIC lighter.

  2. 02

    Cone pocket

    With lobe

    The cone piece and the bottle lid.

  3. 03

    Flower well

    Round

    The medical cannabis holder.

    Recreational cannabis is illegal in Australia.

  4. 04

    Stoker slot

    Slot

    The stoker tool.

  5. 05

    Centre drawer

    Drawer

    A removable ash tray, foil-lined.

Top view of Bucket Shelf Premium. Warm-white pockets surround the round bore: lighter slot, flower well, stoker slot, cone pocket and the centre drawer.
Premium, top view, pockets lit. The centre drawer is the dark rectangle. It is the ash tray, and it is not one of the four lit pockets.

The lid

Clicks home.

Low-profile. Magnets pull it into place with a click. It sits only on the rim, clear of everything inside.

Regular uses 4 magnets: 2 in the shelf, 2 in the lid. On Premium, a Hall-effect sensor reads the lid’s magnet, and the lid is the switch.

  • Low

    It stays clear of the pieces in the pockets.

  • Magnetic

    It pulls itself into place.

  • On the rim

    The lid never lands in the kit.

Demo

Watch the shelf.

The approved demo. About 42 seconds, with audio and on-screen text: the bore, the pockets, the ash-tray drawer, the lid as the switch, the 10-minute auto-off, and the magnetic close.

Bucket Shelf demo. On-screen titles carry the feature names.
Bucket Shelf Premium with the lid lifted. The lighter slot, flower well, stoker slot and cone pocket glow warm white above a bucket.
Premium. Lid lifted, pockets lit.

Premium

Lift the lid. The pockets wake up.

$249 AUD. Warm-white light, 3000 K, only while you want it. The lid is the only control.

  • 1.5 s

    Fade up when the lid lifts. Fade out when it returns.

  • 3

    Brightness levels. Lid back, then lift again within 1.5 seconds.

  • 10 min

    Then it turns off, if the lid stays off.

  • 2 × AAA

    Rechargeable NiMH cells. Screw-down hatch underneath.

  1. 01

    Each of the 4 pockets has a white liner backed by a ring of warm-white (3000 K) LED strip. Those pockets are the lighter slot, the cone pocket, the flower well, and the stoker slot.

  2. 02

    Lift the lid and the pockets fade up over 1.5 seconds. Put it back and they fade out.

  3. 03

    3 brightness levels. Put the lid back and lift it again within 1.5 seconds to step to the next.

  4. 04

    Turns itself off after 10 minutes with the lid off.

  5. 05

    Runs on 2 × AAA rechargeable (NiMH) batteries behind a screw-down hatch underneath.

  6. 06

    A Hall-effect sensor detects the lid’s magnet. There is no switch or button anywhere. The lid is the switch.

Three-quarter view of Bucket Shelf Premium on a bucket, lid off, with the four pockets glowing warm white.
Premium, three-quarter view, pockets lit.

Specs

Footprint
220 × 220 mm
Height
19 mm at the rim. 42 mm with the lid on.
Fit
EasiYo bucket. The Ø136 mm bore slides over the neck and rests on the shoulder.
Material
PLA. Regular is charcoal. Premium is a charcoal body with white light liners.
Made in
Australia

Regular and Premium

One shelf, two editions. Both fit an EasiYo bucket, both keep the kit under a magnetic lid, both are PLA, both are made in Australia.

Price

Regular
$99 AUD
Premium
$249 AUD

Colour

Regular
One colour: charcoal PLA Matte
Premium
Charcoal body and white light liners

Magnetic lid

Regular
4 magnets (2 in the shelf, 2 in the lid). Pulls into place with a click.
Premium
Pulls into place with a click. A Hall-effect sensor reads the lid’s magnet.

Flower well liner

Regular
Optional cast silicone liner
Premium
White liner backed by a warm-white LED ring

Pocket lighting

Regular
Not included
Premium
Four pockets fade up over 1.5 seconds when the lid is lifted, and fade out when it is put back.

Brightness

Regular
Not included
Premium
3 levels. Put the lid back and lift it again within 1.5 seconds to step to the next.

Auto-off

Regular
Not included
Premium
Turns off after 10 minutes with the lid off.

Power

Regular
Not included
Premium
2 × AAA rechargeable (NiMH) batteries behind a screw-down hatch underneath.

Switch

Regular
Magnets hold the lid.
Premium
No switch or button anywhere. The lid is the switch.

Choose an edition.

Prices are in Australian dollars. Checkout is one edition at a time.

Regular

$99AUD

  • One colour: charcoal PLA Matte
  • 4 magnets (2 in the shelf, 2 in the lid)
  • Optional cast silicone liner for the flower well
  • Fits an EasiYo bucket (Ø136 mm bore)

Premium · pockets light up

$249AUD

  • The four pockets light up when you lift the lid
  • White liner and a warm-white (3000 K) LED ring in each pocket
  • Fade up over 1.5 seconds. Fade out when the lid goes back
  • 3 brightness levels: replace the lid and lift it again within 1.5 seconds
  • Turns off after 10 minutes with the lid off
  • 2 × AAA rechargeable (NiMH) batteries, screw-down hatch underneath
  • Hall-effect sensor. No button. The lid is the switch
  • Fits an EasiYo bucket (Ø136 mm bore)